FUJI NXT M6 III Pick and Place Machine

FUJI NXT M6 III Pick and Place Machine

NXT III Scalable Placement Platforms
The NEW NXT III is a highly productive, multi-functional modular placing machine. Built for speed, it features a faster XY robot and tape feeders, as well as a new H24 head that achieves 35,000 chips per hour. The NXT III supports the smallest parts being used in mass production with extreme placing accuracy.
FEATURES
Improved Productivity
A faster XY robot and faster tape feeders, as well as a newly developed “flying vision” parts camera, mean increased placing ability for all part sizes and types.
The new H24G high-speed head achieves 37,500 cph (chips per hour) (Productivity priority mode) per module, a 44% improvement from the fastest speed of the NXT II.
* Under conditions at Fuji.

0201 mm Part Support, +/- 0.025 mm Placing Accuracy
As well as supporting the smallest parts currently being used in mass production (0402 mm, 01005″), the NXT III can also handle the next generation of components heading for the market – 0201 mm parts.
By improving machine rigidity and further refining its independent servo control and vision recognition technology, Fuji has achieved a placing accuracy for small chip parts of +/- 0.025 mm* (3sigma, Cpk≥1.00).
* Under conditions at Fuji.
Improved Usability
The GUI of the original NXT was widely praised for making use of intuitive and easy-to-understand pictograms instead of relying on language-based instructions.
This interface is now combined with a touchscreen panel to make operation even easier. This reduces the number of button pushes required and makes selecting commands easier, as well as improving quality by reducing the chance of performing the wrong command.
High Compatibility
Many of the main units from the NXT II such as placing heads, nozzle stations, feeders, tray units, and feeder pallet exchange units can be used on the NXT III without any modifications.
SPECIFICATIONS

	M3 III	M6 III
Applicable PCB size (LxW)	48 x 48 mm to 250 x 510 mm (double conveyor)* 48 x 48 mm to 250 x 610 mm (single conveyor) *Double conveyors can handle PCBs up to 280 (W) mm. PCBs larger than 280 (W) mm must be produced by changing the double conveyor to single lane production mode.	48 x 48 mm to 534 x 510 mm (double conveyor)* 48 x 48 mm to 534 x 610 mm (single conveyor) *Double conveyors can handle PCBs up to 280 (W) mm. PCBs larger than 280 (W) mm must be produced by changing the double conveyor to single lane production mode.
Part types	Up to 20 types of parts (calculated using 8 mm tape)	Up to 45 types of parts (calculated using 8 mm tape)
PCB loading time	For double conveyor: 0 sec (continuous operation) For single conveyor: 2.5 sec (transport between M3 III modules), 3.4 sec (transport between M6 III modules)
Placement accuracy (Fiducial mark standard) * The placing accuracy is obtained from tests conducted by Fuji.	H24G : +/-0.025 mm (Standard mode) / +/-0.038 mm (Productivity priority mode) (3sigma) cpk≥1.00 V12/H12HS : +/-0.038 (+/-0.050) mm (3sigma) cpk≥1.00 H04S/H04SF : +/-0.040 mm (3sigma) cpk≥1.00 H08/H04 : +/-0.050 mm (3sigma) cpk≥1.00 H02/H01/G04 : +/-0.030 mm (3sigma) cpk≥1.00 H02F/G04F : +/-0.025 mm (3sigma) cpk≥1.00 GL : +/-0.100 mm (3sigma) cpk≥1.00	H24G : +/-0.025 mm (Standard mode) / +/-0.038 mm (Productivity priority mode) (3sigma) cpk≥1.00 V12/H12HS : +/-0.038 (+/-0.050) mm (3sigma) cpk≥1.00 H08M/H04S/H04SF : +/-0.040 mm (3sigma) cpk≥1.00 H08/H04/OF : +/-0.050 mm (3sigma) cpk≥1.00 H02/H01/G04 : +/-0.030 mm (3sigma) cpk≥1.00 H02F/G04F : +/-0.025 mm (3sigma) cpk≥1.00 GL : +/-0.100 mm (3sigma) cpk≥1.00
Productivity * The throughput above is based on tests conducted at Fuji.	H24G : 37,500 cph (Productivity priority mode) / 35,000 cph (Standard mode) V12 : 26,000 cph H12HS : 24,500 cph H08 : 11,500 cph H04 : 6,500 cph H04S : 9,500 cph H04SF : 10,500 cph H02 : 5,500 cph H02F : 6,700 cph H01 : 4,200 cph G04 : 7,500 cph G04F : 7,500 cph GL : 16,363 dph (0.22 sec/dot)	H24G : 37,500 cph (Productivity priority mode) / 35,000 cph (Standard mode) V12 : 26,000 cph H12HS : 24,500 cph H08M : 13,000 cph H08 : 11,500 cph H04 : 6,500 cph H04S : 9,500 cph H04SF : 10,500 cph H02 : 5,500 cph H02F : 6,700 cph H01 : 4,200 cph G04 : 7,500 cph G04F : 7,500 cph 0F : 3,000 cph GL : 16,363 dph (0.22 sec/dot)
Supported parts	H24G : 0201 to 5 x 5 mm Height : up to 2.0 mm V12/H12HS : 0402 to 7.5 x 7.5 mm Height : up to 3.0 mm H08M : 0603 to 45 x 45 mm Height : up to 13.0 mm H08 : 0402 to 12 x 12 mm Height : up to 6.5 mm H04 : 1608 to 38 x 38 mm Height : up to 9.5 mm H04S/H04SF : 1608 to 38 x 38 mm Height : up to 6.5 mm H02/H02F/H01/0F : 1608 to 74 x 74 mm (32 x 180 mm) Height : up to 25.4 mm G04/G04F :0402 to 15 x 15 mm Height : up to 6.5 mm
Module width	320 mm	645 mm
Machine dimensions	L: 1295 mm (M3 III x 4, M6 III x 2) / 645 mm (M3 III x 2, M6 III) W: 1900.2 mm, H: 1476 mm

 

Call Me Now!
Mobile:86-18002533732
Skype:happyvickey1213
Mail:happyvickey@vigor-global.com
Whataspp:+8618002533732

 

FAQ

BUYING USED EQUIPMENT FROM BUYSMT?
Buysmt’s technicians prepare each machine for
a full functional demonstration.
We welcome our client’s acceptance criteria,
even application based.
We encourage all of our clients to visit for a complete demonstration of the machine’s functionality,
but we can also provide a demonstration by video for your review.
We will also try to accommodate any special acceptance criteria that you may have.
Our goal is eliminate your buyer’s risk…

WHAT’S THE PURCHASE PROCESS TYPICALLY LIKE?
When a client decides that they would like to pursue a machine,
they will issue a conditional purchase order.
Buysmt will then place the machine on hold and schedule a demonstration for their approval.
The demonstration is either conducted at our facility or by video. If the client accepts the machine,
Buysmt will then invoice against this purchase order. The machine will be prepared by vigor technicians for shipment.
Buysmt will load the machine onto the buyers truck. If there are special packing needs,
Buysmtr will be happy to help with all the arrangements.
Buysmt can provide ocean packing when needed.

SHOULD I BE BUYING USED EQUIPMENT?
Used equipment is a very popular choice for many manufacturers worldwide.
Even the largest manufacturers consider used equipment for their needs; however,
Buysmt feels that it is not always the best solution for a client.
Buysmt makes available each piece of equipment for fully functional demonstration,
which substantially reduces are buyers risk. With many used equipment suppliers and auctions,
the equipment is not available for functional demonstration.
Only very experienced buyers should participate in this type of purchase unless you have incorporated this risk into your purchase price.

DOES BUYSMT OFFER A WARRANTY WITH THE EQUIPMENT?
Buysmt is all about reducing your purchase risk.
We will bend over backwards to make sure that you have every assurance of the equipment’s condition prior to purchase,
but we do not offer a warranty with the equipment.
CEE is responsible for supplying all the information you need to make an informed purchase decision on the equipment.
We can not be responsible for the machine after it leaves our facility.
Why? Our goal is supply used equipment that is fully functional and ready for production.
We are not here to replace the OEM, which has much lower cost on their spare parts.
If a warranty is a must for you, please discuss with your vigor sales agent.
We do have extended protection options for buyers who require it.

HOW DO I SELL MY USED TO EQUIPMENT TO BUYSMT?
The process is simple. Call VIGOR! VIGPR will review your equipment list.
We will supply you with a simple question list on the equipment.
When we receive your answers, we will supply you with an offer conditional upon inspection.
If you accept the offer, Buysmt will have a technician inspect the equipment within a couple days. I
f it’s good equipment, Buysmt will issue a purchase order for the equipment and send the money.
We will make all the arrangements for pick-up. It’s that easy.